Online ordering is back!

There's been an unprecedented national shortage of timber and building materials over the past few weeks. We're trying to get back on our feet but we're still facing some stock issues.

We're now taking orders online again, but for certain products we might have to make substitutions where it's realistic to do so. If not, we'll be in touch regarding your items.

Single component moisture-cure adhesive. Free of water, isocyanates, epoxy and amino compounds.

Item Code: 1695





Liberon High Resistance Varnish provides exceptional protection for wood floors and a superior resistance to high foot traffic. It is particularly suited to rooms that are in constant use such as hallways, dining rooms, lounges and stairs. High Resistance Varnish offers a durable, high quality finish within 24 hours. Its low odour formula and non-slip finish make it ideal for use in the family home.


- Resistant to heel impact and wear and tear 
- High resistance – 60% the hardness of glass 
- Stain and water resistant 
- 2 coats in one day 
- Low odour 
- Endorsed by the Guild of Master Craftsmen
- Usage :  Interior

How to use

Sand the floor if required and remove all previous finishes. Ensure the surface is clean, dry and dust free. If you want to colour the wood you can apply Liberon Wood Floor Dye to the timber before varnishing. Liberon Wood Floor Dye is available in a range of wood shades. 

Stir well before use. Apply High Resistance Varnish evenly with a brush or short hair roller. Allow to dry for a minimum of 6 hours before applying further coats, lightly sanding the surface between coats if required. We recommend a minimum of 3 coats are applied. More coats can be applied for a more durable finish or where foot traffic is particularly heavy. Allow the final coat of varnish a minimum of 24 hours drying time before using the floor. 

Always test product on a spare surface or inconspicuous area for colour compatibility and end result. A wet surface will be an indication of the final colour. 

Cleaning and maintenance 
Wipe any spills immediately. For general maintenance wipe over with a damp mop or cloth using a mild detergent if required. If the surface shows signs of wear re-apply a coat of varnish or coat with Liberon Wood Floor Reviver.

 Liberon advice
Apply varnish plank by plank while facing the sunlight. Start in the corner of the room and work back towards the door. Ideal application conditions are between 12 and 25°C. 


·    Allow all wood dyes to dry for a minimum of 8 hours before applying High Resistance Varnish.

·    The varnish may raise the grain on some hard woods and may darken some types of timber.

·    To reduce the darkening of timber when using Liberon High Resistance Floor Varnish we recommend the use of Liberon Pre-varnish for wood floors.  


750 ml = 10-12 m²

VOC Information 
EU limit value for High Resistance Varnish (Cat A/I): 600 g/L (2007). High Resistance Varnish contains Max 538 g/L VOC. 


Clear Matt, Clear Satin and Wax Effect

Pack size

2.5 L

Drying time

6 hours between coats 24 final


Size:2.5 litres
Availability: In Stock
£34 / Each (inc. VAT)
15 litres / each (£2.27 / litres)
Item Category: 222
Back to top